By default, Windows enables the power saving feature all USB ports known as USB Selective Suspend. This feature is supposed to save power by shutting down USB ports that are only used intermittently. However, sometimes the USB port does not get turned back on when it is needed or is inadvertently turned off. The Microsoft Office suite has always tried to improve the productivity levels of its users by implementing tools that save us time. Below are my 3 top tips (for version 2007 onwards) that I find useful to help shave a few minutes off work each day.
Get 'the directory name is invalid' error in Windows 10? Here, you can get the problem fixed and regain access to your data on USB flash drive, external hard drive or SD card. Part 1 - 3 ways to fix the error. https://mesm.over-blog.com/2021/01/you-need-a-budget-4-3-817.html. Part 2 - recover data with EaseUS Data Recovery Wizard.
Many users who did a Windows 10 upgrade reported that they have encountered 'the directory name is invalid' error while plugging their USB flash drive, external hard drive or SD card into PC.
Being caught by this problem, they will not be allowed to open the device and access your data there. Here, you can get help no matter you want to recover data in Windows 10 or get the problem fixed: Stream xbox games to ipad.
When it reports 'the directory name is invalid' error in Windows 10, the first thing you can try is to re-insert or replug the external hard drive, USB or SD card via another port. How to save imovie on mac. Some users said changing the USB port solved the problem.
If this does not work, connect the device to another computer to check if can be opened or not. If the device can not be accessed, try to check and repair disk errors in Windows 10. Otherwise, it suggests that 'the directory name is invalid' error has nothing to do with disk corruption and you have to try other ways to get the error fixed.
After ruling out the possibility that 'the directory name is invalid' error appears because of USB ports issue or disk errors, we can guess that the problem might stem from disk driver. In this case, we recommend you to try to update the disk driver and check if it helps.
If 'the directory name is invalid' error still persists or any data loss happens during the fixing process, you can try EaseUS disk data recovery software to scan the external hard drive, USB or SD card to find and retrieve your important files.
Step 1. Select a location and start scanning.
Launch EaseUS Data Recovery Wizard, hover on the partition where you lost data, then click 'Scan'. Www jw org bem library.
Step 2. Preview and select the files.
Wait until the scanning completes. If you need to double-click the item to preview the file, then select the data you attempt to recover.
Step 3. Recover lost data.
Click 'Recover', choose a location to save the recovered data, then click 'OK'. You should store the data in another place instead of the original one.
Windows 7 / Getting StartedPower Management policy settings in Windows Vista or later versions are per-computer settingsthat apply only to computers running Windows Vista or later versions. Each Power Managementpolicy setting may be configured independently for when the computer is pluggedin or running on battery power.
Group Policy settings for Power Management are found in the following location:
Computer Management/Policies/Administrative Templates/System/Power ManagementThe subnodes beneath this location are as follows: Mxgp3 – the official motocross video game 1 05.
Table below lists all Power Management policy settings for Windows 7, showing only the'On Battery' setting whenever a corresponding 'Plugged In' setting also exists. The table alsoindicates the policy settings that are new in Windows 7 by prefixing them with an asterisk (*).
Selected Power Management Policy Settings for Windows Vista| Policy Name | Description |
|---|---|
| found under /System /Power Mana gement | |
| Select An Active Power Plan (Applies to Windows Vista or later versions) | If you enable this setting, you can specify the active power planfrom a list of default Windows Vista power plans. To specify a custom power plan, use the Custom Active Power Plan setting. If you disable this policy or do not configure it, users can see and change this setting. |
| Specify A Custom Active Power Plan (Applies to Windows Vista or later versions) | If you use this policy, you can specify a custom active power planwhen you enter a power plan's GUID. Retrieve the custom power plan GUID by using Powercfg, the power configuration commandlinetool. Enter the GUID using the following format: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX (For example, enter 103eea6e-9fcd-4544-a713-c282d8e50083.)If you disable this policy or do not configure it, users can see and change this setting. Note that this is a general setting that is not specific to mobilecomputers. Also, a plan corresponding to the GUID-specified power plan must exist on the target computer. |
| found under /System /Power Mana gement /button settings | |
| Select The Lid Switch Action (On Battery) (Applies to Windows Vista or later versions) | If you enable this policy, you can specify the action that WindowsVista takes when a user closes the lid on a mobile PC. Possible actions include:
|
| Select The Power Button Action (On Battery) (Applies to Windows Vista or later versions) | If you enable this policy setting, you can specify the action thatWindows Vista takes when a user presses the power button. Possible actions include:
|
| Select The Sleep Button Action (On Battery) (Applies to Windows Vista or later versions) | If you enable this policy setting, you can specify the action thatWindows Vista takes when a user presses the sleep button.Possible actions include:
|
| Select The Start Menu Power Button Action (On Battery) (Applies only to Windows Vista) | If you enable this policy setting, you can specify the action that Windows takes when a user presses the UI sleep button. Possibleactions include:
|
| found under /System /Power Mana gement /hard disk settings | |
| Turn Off The Hard Disk (On Battery) (Applies to Windows Vista or later versions) | If you enable this policy, you can specify, in seconds, how muchidle time should elapse before Windows Vista turns off the hard disk. If you disable this policy or do not configure it, users can see and change this setting. Note that this is a general setting that is not specific to mobile computers. |
| found under /System /Power Mana gement /notification settin gs | |
| Critical Battery Notification Action (Applies to Windows Vista or later versions) | If you enable this policy setting, you can specify the action thatWindows takes when battery capacity reaches the critical-battery notification level. Possible actions include:
|
| Critical Battery Notification Level (Applies to Windows Vista or later versions) | Specifies the percentage of battery capacity remaining thattriggers the critical-battery notification action. If you enable this policy, you must enter a numeric value (as a percentage) to set the battery level that triggers the criticalbatterynotification. To set the action that is triggered, see the Critical Battery Notification Action policy setting. If you disable this policy setting or do not configure it, users can see and change this setting. |
| Low Battery Notification Action (Applies to Windows Vista or later versions) | If you enable this policy setting, you can specify the action thatWindows takes when battery capacity reaches the low-battery notification level. Possible actions include:
|
| Low Battery Notification Level (Applies to Windows Vista or later versions) | Specifies the percentage of battery capacity remaining thattriggers the low-battery notification action. If you enable this policy, you must enter a numeric value (as a percentage) that triggers the low-battery notification. To set theaction that is triggered, see the Low Battery Notification Action policy setting. If you disable this policy setting or do not configure it, users can see and change this setting. |
| *Reserve Battery Notification Level (Applies only to Windows 7 or Windows Server 2008 R2) | Specifies the percentage of battery capacity remaining thattriggers the reserve power mode. If you enable this policy setting, you must enter a numeric value (as a percentage) to set the battery level that triggers the reservepower notification. If you disable this policy setting or do not configure it, users can see and change this setting. |
| Turn Off Low Battery User Notification (Applies to Windows Vista or later versions) | Disables a user notification when the battery capacity remainingequals the low-battery notification level. If you enable this policy, Windows will not show a notification when the battery capacity remaining equals the low-battery notificationlevel. To configure the low-battery notification level, see the Low Battery Notification Level policy setting. The notificationwill be shown only if you configure the Low Battery Notification Action policy setting to No Action. If you do not configure this policy setting, users can see and change this setting. |
| found under /System /sleep settin gs | |
| *Allow Applications To Prevent Automatic Sleep (On Battery) (Applies only to Windows 7 or Windows Server 2008 R2) | Allows applications and services to prevent Windows from automaticallytransitioning to sleep after a period of user inactivity. If you disable this policy setting, applications, services, or drivers may not prevent Windows from automatically transitioning tosleep. Only user input will be used to determine whether Windows should sleep automatically. |
| *Allow Automatic Sleep With Open Network Files (On Battery) (Applies only to Windows 7 or Windows Server 2008 R2) | If you enable this policy setting, the computer will sleep automaticallywhen network files are open. If you disable this policy setting, the computer will not automatically sleep when network files are open. |
| Allow Standby States (S1-S3) When Sleeping (On Battery) (Applies to Windows Vista or later versions) | When this policy is enabled, Windows may use Stand By states tosleep the computer. If this policy is disabled, the only Sleep state a computer may enter is Hibernate. |
| Require A Password When A Computer Wakes (On Battery) (Applies to Windows Vista or later versions) | If you enable this policy or if this policy is not configured, the useris prompted for a password when the system resumes from sleep. If you disable this policy, the user is not prompted for a password when the system resumes from sleep. |
| Specify The System Hibernate Timeout (On Battery) (Applies to Windows Vista or later versions) | If you enable this policy setting, you must provide a value, inseconds, indicating how much idle time should elapse before Windows transitions to Hibernate. If you disable this policy setting or do not configure it, users cansee and change this setting. |
| Specify The System Sleep Timeout (On Battery) (Applies to Windows Vista or later versions) | If you enable this policy setting, you must provide a value, inseconds, indicating how much idle time should elapse before Windows transitions to sleep. If you disable this policy setting or do not configure it, users can see and change this setting. |
| *Specify The Unattended Sleep Timeout (On Battery) (Applies only to Windows 7 or Windows Server 2008 R2) | If you enable this policy setting, you must provide a value, inseconds, indicating how much idle time should elapse before Windows automatically transitions to sleep when the user leavesthe computer unattended. If you specify 0 seconds, Windows will not transition to sleep automatically. If you disable this policy setting or do not configure it, users can see and change this setting. |
| Turn Off Hybrid Sleep (On Battery) (Applies to Windows Vista or later versions) | Disables Hybrid Sleep, which refers to the use of hibernationduring sleep to store the contents of the computer's memory. If you enable this policy setting, a hibernation file (Hiberfile.sys) isnot generated when the system transitions to sleep (Stand By). If you do not configure this policy setting, users can see and change this setting. |
| Turn Off The Ability For Applications To Prevent Sleep Transitions (On Battery) (Applies to Windows Vista or later versions) | If you enable this policy setting, an application or service mayprevent the system from sleeping (using the Hybrid Sleep, Stand By, or Hibernate setting). If you disable this policy setting or do not configure it, users can see and change this setting. |
| found under /System /Video and disp lay settin gs | |
| *Reduce Display Brightness (On Battery) (Applies only to Windows 7 or Windows Server 2008 R2) | If you enable this policy setting, you must provide a value, inseconds, indicating how much idle time should elapse before Windows automatically reduces the brightness of the display. Windows will reduce the brightness of only the primary display integrated into the computer. If you disable this policy setting or do not configure it, users cansee and change this setting. |
| *Specify The Display Dim Brightness (On Battery) (Applies only to Windows 7 or Windows Server 2008 R2) | If you enable this policy setting, you must provide a value, as apercentage, indicating the level at which Windows automatically reduces the brightness of the display. If you disable this policy setting or do not configure it, users can see and change this setting. |
| Turn Off Adaptive Display Timeout (On Battery) (Applies to Windows Vista or later versions) | Manages how Windows controls the setting that specifies howlong a computer must be inactive before Windows Vista turns off the computer's display. If you enable this policy, Windows automatically adjusts the setting based on what the user does with the keyboard or mouse to keep the display turned on. If you disable this policy, Windows uses the same setting regardless of the user's keyboard or mouse behavior. If you don't configure this setting, users can see and change this setting. |
| Turn Off The Display (On Battery) (Applies to Windows Vista or later versions) | If you enable this policy, you must provide a value, in seconds,indicating how much idle time should elapse before Windows turns off the display. If you disable this policy or do not configure it, users can see and change this setting. |
| *Turn Off Desktop Background Slideshow (On Battery) (Applies only to Windows 7 or Windows Server 2008 R2) | If you enable this policy setting, the desktop background slideshowis enabled. If you disable this policy setting, the desktop background slideshow is disabled. if you do not configure this setting, users can see and change this setting. |
0 
Star